Kidde Smoke & Carbon Monoxide Detector, AA Battery Powered, LED Warning Light Indicators, 1 Pack

Description

The Kidde Smoke & Carbon Monoxide Detector, AA Battery Powered, LED Warning Light Indicators, model 900-CUDR, is an alarm combo that detects smoke, fire, & carbon monoxide gas, using a single alarm. Operating on two AA batteries (included) for protection during a power failure, the Kidde Smoke and Carbon Monoxide Alarm is equipped with self-testing components that are always checking the unit to ensure the device is operating as expected*. Photoelectric sensing technology that senses visible fire particles (associated with smoldering fires), while an electrochemical sensor detects carbon monoxide. When a smoke, fire, or carbon monoxide event occurs, the Kidde fire alarm warns with an 85-decibel alarm sound & flashing red LEDs. Three LED warning lights provide status of the alarm: a green status alerts to the alarm operating properly, amber alerts to faulty operation or connection, and red alerts to smoke, fire, or carbon monoxide. When the smoke alarm is at the end of its life span, the detector will announce, “Replace Alarm!”. The Smart-Hush button silences the unit for approximately 8 minutes, which is helpful when this smoke detector carbon monoxide detector combo sounds from things like routine cooking or shower steam. Install a carbon monoxide smoke detector combo on every level of your home and near bedrooms to help keep your family safe. UL Certified with a 10-year limited manufacturer’s warranty. Meets requirements of UL 2034, UL217, NFPA72, (chapter 11 2002 edition) The State of California Fire Marshal, NFPA101 (One and two family dwellings) Federal Housing Authority (FHA), Housing and Urban Development (HUD).

2-in-1 Detection – Smoke & carbon monoxide detector combo alerts you to both smoke & fire events as well as poisonous, CO gas in a single device
24/7 Self-testing components are always checking the device to ensure it’s operating as expected (not a substitute for a manual push test)
Easy installation mounting bracket included for quick installation in 4 orientations
Photoelectric sensor detects visible fire particles associated with slow, smoldering fires, while the electrochemical sensor detects carbon monoxide
85-decibel alarm & LED warning indicators alert you to various status: green = normal operation, amber = operating error, and red = smoke, fire or carbon monoxide event
Battery operated to provide reliable detection, even during power outages; two AA batteries included
UL Listed with a 10-year limited warranty which begins when the alarm is powered on, if that date is unknown it should be assumed the alarm should be replaced.

Additional information